There are a variety of coating techniques to protect the body of the vehicle. As the name suggests, in which the surface of the car covered with a glass membrane, "glass coating" Among others, has received much attention in recent years from its excellent performance. This film is a mineral glass, with little degradation over time is a characteristic. Long period of time that will prevent dirt adhering to the body. It is a method of coating a very high degree of perfection in terms of protecting the body. However, since one micron (very thin), and the film thickness does not have the ability to produce luster and shine to itself. In addition, TPC is not possible to cover minor scratches on the body already. The advantages of glass coating is maintained as much as possible, TPC (Techno Pro Coat) was also pursue performance of "shine" further. It is the next-generation coating was achieved at a high level meet elements are required for coating, in a wide range of user needs.
The advantages of glass coating is maintained as much as possible, TPC (Techno Pro Coat) was also pursue performance of "shine" further. It is the next-generation coating was achieved at a high level meet elements are required for coating, in a wide range of user needs.
TPC (Techno Pro Coat) is a method for forming a coating film on the surface of the vitreous body strong. "Thickness, high hardness and high adhesion" high Features of the film. Film thickness as high as 3-4 microns thick and high hardness corresponding to 6H about pencil hardness, cut off a powerful dirt to try to adhere to the body, coating the glass and prevents scratches occuring at car wash. Achieve this thick film, not in the glass coating, glossy shine, I efface cover the fine scratches that were in the original body.
This film, in close contact with the painted surface strongly, and is without any deterioration or peeling, imdicates "antifouling" "luster" "scratch-resistant", protect the paint surface for a long period of time.keep its ability over a long period of time.
1. Excellent gloss, eliminating the need for maintenance, such as wax.
2. Form a hard surface body resistant to scratches as small scratches when car is washed.
3. For excellent antifouling, reducing the number of car wash, it will save time and resources.
4. For durable, long-lasting effect of these.
TPC, which is recommended for those who want to cherish and preserve beautiful car, Besides, it is also recommended if such vehicles and work vehicles where there is no time every day, and not spend time on maintenance too. In addition to automobiles, personal watercraft(JET SKI etc), motorbike, scooters can also be applied.
After coating the coating liquid, chemically react with the moisture in the air, TPC will continue to cure slowly at room temperature for about 18-24 hours.
Because it's not contain any additives, diluents (impurities), is made of nearly 100% single component, there is almost no decrease in film thickness after drying and curing.
The main components of the TPC is a silane compound of organic matter.
So, TPC is not a mineral coating glass, glass-based coating is classified as.
Since the organic matter, as well as other glass-based coating, ultraviolet degradation occurs. However, TPC does not contain any impurities, very close to the inorganic, slow decomposition rate, is on have the durability comparable to inorganic glass coating.
Each other strongly adhere to the surface of the car paint, after curing, to demonstrate the "scratch-resistant" "antifouling" "luster" "scratch-resistant" strong, protect the paint surface for a long period of time.
We introduce how to use TPC to you.
1.Surface treatment (polishing)
The original condition of the body are not good, it makes no sense how much high-performance coatings. In addition, they also halved effect and durability of the coating.Surface preparation is a very important task. Better assess the condition of the car, we'll pull out the body to remove dirt and scratches, and iron powder, shining beautifully.
The surface treatment of TPC has also another important role. Base treatment agent is used that is optimized assuming the application of the TPC. It differs from the typical, this base treatment agent components are blended special silica, this component is mapped to the surface to be coated. Using the property of adhesion between the silica of the same nature with each other strongly, Special silica mapped and silica component of the TPC has been integrated, the coating is stronger.
Rubbed by hand respectfully to each panel for each TPC. It may take 18-24 hours of time in the drying and curing, lay the whole day under a controlled environment. Then, proceed to the final finish, we will be delivered.
■In addition to the car body painted
TPC is also applicable to plastic parts and headlight, highly effective.To plastic parts, such as a mall that is likely to deteriorate the effect of anti-white and gloss restoration, has the effect of preventing the headlights fade.
3.Caring After you have applied TPC
The body becomes a stain-resistant by TPC, I do not mean not at all dirty.
But, dirt can be removed with just a simple wash.
Care is unnecessary, such as wax.